Cooling the Modern Day Wiring Closet
Download
Report
Transcript Cooling the Modern Day Wiring Closet
LAN Room and Wiring
Closet Cooling
Presented by Jim Magallanes
TechniCool Innovations Inc.
[email protected]
1811 Upham Street Suite B-1, Broomfield CO 80020
303-908-8043 Phone / 888-883-8353 Fax
www.CRuptime.com
Outline
Wiring Closet – General Description
Electronic Equipment Trends
Cooling Load
Best Cooling Practices
Cooling Solutions
Portable Systems
Mini Split Systems
A/C Computer Cabinet Systems
A/C Ceiling Systems
Precision Ceiling Systems
Conclusion
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Wiring Closet – General Description
Wiring Closet - Critical subsystem of a network environment
Small Room with Servers/Telecom/Electrical Equipment/ UPS
Floor Space is a Premium: <100 ft2
Contents: 1 – 3 Equipment Racks
Heat Load per Rack: 1.0 - 2.0 kW Avg.
Typical Cooling: None or Building Cooling During Day
Remote location of building
Security: Medium
Locked Door and/or Locked Cabinet
“The average wiring closet contains $150,000 - $300,000
of equipment and a typical small server room often
houses more than three times that amount.”
- Mitch Medford, NetBotz CTO
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Electronic Equipment Trends
Power = Heat
Servers
Blade Servers
Smaller & More Powerful
IP & VOIP Telecom Equip
High-powered switches
and equipment
Low-powered legacy
Requires UPS support
Overheated IT equipment
Figure: Product Heat Density Chart
(The Uptime Institute)
Reduced Life / Hardware Damage
Reduced Reliability
Slower Network
Costly System Downtime
General Rule
Every 10°C temperature rise in nominal temperatures produces a
50% reduction in the lifetime and long-term reliability of IT hardware
- MIL-HDBK 217 / Arrhenius Models
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Electronic Equipment Trends
Power = Heat
Servers
Blade Servers
Smaller & More Powerful
IP & VOIP Telecom Equip
High-powered switches
and equipment
Low-powered legacy
Requires UPS support
Overheated IT equipment
Figure: Product Heat Density Chart
(The Uptime Institute)
Reduced Life / Hardware Damage
Reduced Reliability
Slower Network
Costly System Downtime
General Rule
Every 10°C temperature rise in nominal temperatures produces a
50% reduction in the lifetime and long-term reliability of IT hardware
- MIL-HDBK 217 / Arrhenius Models
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
LAN Room Heat Problem
Businesses dependent on computers and telecom equipment
2008
2004
for day-to-day operations
Recommended Recommended
Need to keep IT equipment cool
Tight controls/monitoring
Redundancy
LAN Room/Wiring Closets
Temperatures in the upper 60Fs/lower 70s are practical
Jim Magallanes
Range
Min
Max
ASHRAE Technical Committee 9.9
Temperatures
64.4
80.6
68
77
Thermal Guidelines
(°F)
Humidity Levels
Inlet Temperatures
44 - 60 25 - 48 40 - 55 40 - 55
(%RH)
Costly to rely on building A/C Dew Point (°F) 41.9
59
N/A
N/A
Data Centers
ASHRAE – Thermal Guidelines for Data Processing Environments
Upper range temperatures acceptable
Range
Min
Max
Looser controls/monitoring
No redundancy
Ceiling-Mount A/C : Cost Effective Solution for Server Rooms
Cooling Load
Determining the cooling load in a wiring closet
Incremental load from equipment
Nameplate rating
Usually overstated
ASHRAE TC 9.9: Load during operating conditions
Not yet adopted by manufacturers
Determine cooling load from UPS load
Load from all equipment connected to the UPS
Dependent on day and time
Monitor over a period time to get worst case scenario
Other sources of heat
Lights/windows/outside wall/etc…
Electrical power to rejected heat conversion
1 kW = 3,413 Btu/hr.
Jim Magallanes
12,000 Btu/hr = 1 ton of A/C
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions & Best Cooling Practices
Cooling Solutions
Primary cooling for IT equipment
Nights & Weekends when building a/c is off
Added denser IT equipment
Seasonal: Summer or Winter
Redundancy / Emergency backup to primary cooling
Shut down building a/c when people are not in the building
Supplemental Cooling
LAN Room/Wiring Closet is not air conditioned
Planned or unplanned shut downs: Inexpensive insurance plan
Best Practices
Spot Cool vs. Traditional A/C
Managing Air Movement
Direct cold air to front of server: Airflow = Front to Back
Telecom equipment: Airflow = Side to Side
Do not cool down the entire room
Back of the rack: Up to 36°F Hotter
Use blanking panels
Unoccupied rack space: Recirculation of warm air
Organize cabling
Jim Magallanes
Maximize airflow
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Portable Systems
Portable Systems
A self contained packaged air conditioner that is on wheels
and is easily movable to spot cool “hot spots”
Power: 115 VAC, 230 VAC, & 460 VAC
Heat rejection: Ceiling plenum
Air or water cooled
Condensation removal
Tank: Emptying depends on humidity
Pump: Drain/sink/water line
End-user Installation
Connect accessories (15 – 20 minutes)
Non-standard applications may require contractor
Cooling Capacity
Jim Magallanes
1 – 5 Ton units available
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Portable Systems
Portable system features
Wide cooling capacity range
Voltage: 115V, 230V, or 460V
Condensation removal
Tank: Empty periodically
Pump to drain/sink/water line
Operational features
Approx. 1.5 Tons at 115V
Automatic Restart
Air delivery
Grille or nozzle
Ducting Capabilities
Jim Magallanes
Exhaust
Long ducting runs
Return/Make-up Air
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Portable Systems
Pros
Low cost
Relocate unit from room to room
Moves with tenant
Little installation required
No outdoor equipment
Cons
Floor space required
Small heat load on building’s A/C
Condensate removal
Typically not a problem
Tank or pump
No Humidity Controls
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Mini Split Systems
Mini Split Systems
Consists of 2 units connected by refrigerant lines
Indoor Unit – Inside the wiring closet
Discharges cold air
Refrigerant lines
Transfers heat to the outdoor unit
Outdoor Unit – Outside the building
Discharges hot air to the environment
Designed for comfort cooling
High latent cooling
Contractor Installation
Removes moisture from air
Mounting/electrical/refrigerant lines/condensate line
System comes with pre-charged refrigerant lines
Cooling Capacity
Jim Magallanes
1 – 3 Ton units available
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Mini Split Systems
Installation
Guidelines
Wiring Closet
Indoor
Unit
Outside Building
Refrigerant
Lines
70 FT
25 FT
Outdoor
Unit
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Mini Split Systems
Pros
Low cost
No floor space required
No affect on building’s A/C system
Cons
Comfort cooling
Location Restrictions
Landlord Approval
Leasehold improvement
No Humidity Controls
Reliability
Maximum height difference: 25 Ft
Maximum piping length: 70 Ft
Possible leaks at quick-connect
Condensate removal
Does not work in extreme low temperatures
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – A/C Computer Cabinet
Air Conditioned Computer Cabinet
A standard 19” computer cabinet housing a self contained
packaged air conditioner
Power: 115 VAC and 230 VAC
Heat rejection: Ceiling plenum
Condensation removal
Pump: Drain/sink/water line
Evaporative: Exhausts condensation
in warm condenser air
End-user Installation
Delivers data center infrastructure to
LAN room/wiring closet
Connect accessories (20 – 30 minutes)
Cooling capacity per computer cabinet
Jim Magallanes
½ - 1 Ton units available
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – A/C Computer Cabinet
A/C Computer Cabinet Features
Cooling capacity to match IT load
Voltage: 115V or 230V
Airflow Pattern
Air conditioner Location
Pump to drain/sink/water line
Evaporate in exhaust: Poor IAQ
Backup Cooling
Bottom of cabinet to prevent water leak
Condensation Removal
Most IT Equipment: Front to Back
Telecom Equipment: Side to Side
Backup UPS for cooling
Fresh outside air
Automatic Restart
Airflow Pattern
Front to Back
Environmental Monitoring
Airflow Pattern: Side to Side
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – A/C Computer Cabinet
Pros
Low cost
Relocate unit from room to room
Moves with tenant
Little installation required
No outdoor equipment
Efficient cooling
Brings cooling directly to IT heat source
Creates cold aisle/warm aisle for cold inlet temperatures
Delivers data center infrastructure to wiring closet
Cons
Small heat load on building’s A/C
Typically not a problem
Manufacturer specific cabinet
No Humidity controls
Condensation removal
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – A/C Ceiling Systems
A/C Ceiling Systems
An A/C ceiling system is a packaged air conditioner that
fits above the drop ceiling plenum that only has A/C
capabilities.
Packaged system
Contractor Installation
Air Cooled
Water-cooled
Minimal labor
Unit comes pre-charged with refrigerant
Cooling Capacity
Jim Magallanes
1 – 5 Ton units available
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – A/C Ceiling Systems
Precision ceiling features
Cooling capacity: 1 – 5 Tons
Voltage: 115V or 230V
Condensation removal
Pump to drain / sink
/ water line
Gravity drain
Air delivery
Supply air ducting
Exhaust air ducting
Return air ducting
Optional Features
Automatic restart
BMS compatibility
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – A/C Ceiling Systems
Pros
Configurable
No floor space required
Low profile fits most ceiling plenums
Ducting capabilities
Air-cooled or water-cooled
Cold supply air
Exhaust air
Cons
Contractor installed
Landlord Approval
Leasehold improvement
No humidity controls
Small heat load on building’s A/C
Jim Magallanes
Typically not a problem
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Precision Ceiling Systems
Precision Ceiling Systems
A precision ceiling system is an air conditioner that fits
above the drop ceiling plenum that has humidity and
reheat capabilities.
Engineered system for specific applications
Packaged or split systems
Packaged: (1) component inside building
Split: Components inside and outside building
Contractor Installation
Air-cooled/water-cooled/chilled water-cooled systems
Copper piping/electrical/mounting/condensate line
Charges with refrigerant on-site
Cooling Capacity
Jim Magallanes
1 – 8 Ton units available
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Precision Ceiling Systems
Precision ceiling features
Wide cooling capacity range
Voltage: 115V, 230V, or 460V
Condensation removal
Operational features
Pump to drain/sink/water line
Gravity drain
Automatic Restart
Air delivery
Jim Magallanes
Grille
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Precision Ceiling Systems
Pros
Highly configurable
No floor space required
Multiple Options
Packaged or Split
Air-cooled/Water-cooled/chilled water-cooled
Humidity controls/alarms/etc…
Cons
Very high cost
May require outdoor heat rejection equipment
Plenum space above ceiling is limited
Air Delivery is fixed location
Landlord Approval
Leasehold improvement
Engineered for application
Jim Magallanes
Contractor installed: Expensive
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Cooling Solutions – Comparison Chart
Cost /
Adaptable
Portable
Systems
Mini Split
Systems
Low /
Flexible
Low /
Specific
Buildings
A/C
Computer
Cabinet
Moderate
/ Flexible
A/C
Ceiling
Systems
Moderate
/ Flexible
Precision
Ceiling
Systems
Jim Magallanes
High /
Flexible
Ideal Wiring Closet
Comments
Loads: 1 – 5 Tons
Requires floor space
Works with any building
Ideal for backup cooling
• Cost effective solution
• Loads: 0 – 3 Tons
• Close proximity to outside
• No floor space
• Comfort cooling design
•
•
•
•
•
•
•
•
Loads: .5 – 1 Ton/cabinet
No floor space required
Works with any building
Optional alarm/Mini DC
• Little installation required
• Moves with tenant
• Air or water cooled
• Cost effective solution
• Leasehold improvement
• Cost effective solution
• Efficient cooling system
• Little installation required
• Moves with tenant
• Loads: 1 – 5 Tons
• Low height in plenum
• No floor space
• Air or water cooled
• Loads: 1 – 8 Tons
• No Floor space
• Alarms needed
• Better ROI > 3 Tons
• Cost effective solution
• Leasehold improvement
• Site monitoring system
• Leasehold improvement
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
Wiring Closet – Cooling Solution Conclusion
Wiring Closet
Dedicated a/c system
Electronic equipment benefits
Increased life/reliability/server speed
Improve security with locked door
Selecting a cooling solution
Building structure
Budget
Closet requirements
Floor space
Location within building
Available power
Own/Leasehold improvement
Insurance Policy – Mission Critical IT Network
Jim Magallanes
Redundant cooling solution for shut-downs
(planned/unplanned)
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar
LAN Room and Wiring Closet Cooling
Questions
www.CRuptime.com
[email protected]
303-908-8043 Phone
Jim Magallanes
LAN Room and Wiring Closet Cooling – CTM 2012 Operations Seminar