Transcript Monopill S

Kverneland Accord Monopill
Product information 2015
Kverneland Accord Monopill
Precision drill
Content
Monopill
Monopill S
Mechanical
(chain) drive
• Introduction
• Frames
• Sowing unit
• Zero deposit
principle
Monopill e-drive II
• Equipment
Electric driven
• Electronic
• Additinonals
• Summery
Monopill
For sowing of
• Coated Rape (TKG 4,5 - 5g)
• Pelleted Chicory (2.75-3.25mm or Minipill)
Row widths 45 - 56cm
•
Working widths 3.00 –12.00m (6–24 rows)
Rapeseed
Chicoree
•
Sugarbeet
• pelleted Sugar Beet and Fodder Beet with a
standardised seed diameter of 3.5 – 5mm
Monopill – Frames
6 row, rigid frame
• Working width up to 3.0m
rigid
• Power requirement from
40 kW
• Low lifting requirements
• Spring loaded and
adjustable drive wheels
5.00 x 15 AS
• Lever change gearbox with
7 steps (optional e-drive II)
• Working speed -7.5 km/h
Monopill S 6 row
Monopill– Frames
12 row, rigid frame
• Working width 5.40m – 6.00m
• Power requirement from 70 kW
• Gull-wing track markers
• 2 lever change gearboxes
(optional e-drive II)
• Lengthwise transport device
as option
Monopill S 12 row;
with integrated lengthwise
transport device for road
transport
Monopill – Frames
18 row, rigid frame
• Working widths 8.10m – 9.30m
• Power requirement from 100
kW
• 2 lever change gearboxes
(optional e-drive II)
• Integrated hydraulic lengthwise
transport device with tow hitch
and wheels
• Quick and easy conversion for
road transport by hydraulic
move
Monopill e-drive II 18 row; with integrated lengthwise transport device
Monopill e-drive II – Frames
24 row, rigid
Monopill e-drive II 24 row; with
integrated lengthwise transport
device
• Working widths 10.80m – 12.00m
• Power requirement from 110 kW
• Only with e-drive II
• Gull wing folding disc track marker with electro-hydraulic control boxes for double
acting control valve
• Quick and easy conversion for road transport with the integrated hydraulic lengthwise
transport device
Monopill – Frames
12 rows, Parallel Hydraulic (PH) folding –Frame
• Working widths between 5.40m – 6.00m
• Power requirement from 75 kW
• Parallel hydraulic foldable wing sections with electro-hydraulic control
• 3 lever change gearboxes (optional with e-drive II)
• Gull wing folding disc track marker
Monopill e-drive II 12 rows; 6m parallel hydraulic folding frame
Monopill – Frames
18 rows, Parallel Hydraulic (PH) folding –Frame
• Working widths between 8.10 – 9.00m
• Power requirement from 115 kW
• Electric drive only (Controlled by ISOBUS IsoMatch Tellus Terminal 11783 compatible)
• Hydraulic folding gull wing disc track markers
• Hydraulic folding to a transport width of 3m with
electro hydr. control box as standard
Monopill e-drive II 18 rows;
parallel hydraulic folding
Monopill – Rows
Standard sowing unit with
Finger press wheel
Tandem sowing unit
Mulch sowing unit with
Monoflex press wheel
Monopill – Sowing Heart
• The seed disc is rotating through the
second patented seed chamber
• The disc picks only one seed at a time,
additional seeds are wiped off
• Due to the centrifugal force, the seed
remains in the seed cell throughout its
rotation
• With the seeding heart positioned deep
inside the seeding coulter, the seed drop
height is only 3cm
3cm
Monopill – Sowing Heart
• The seed disc rotates counter clockwise
(U), in opposite to the driving direction (F)
• With a seed distance down the row of
20cm, the circumference speed of the disc
= drive forward speed => Zero deposit
• Standard seed spacing of 18 - 24cm with
seed disc A4
• Up & down movements of the parallelogram
have no effect on the seed disc/spacing due
to a specially designed chain guide
20 cm
Zero deposit
Monopill S – Standard Sowing Unit
1
2
3
4
7
8
9
10
5
11
12
1
2
3
4
5
7
8
9
10
11
12
Parallelogram
Depth adjustment
Lifting device
Seed hopper
Press wheel bracket
Front press wheel
Seed coulter
Sowing heart
Intermediate press wheel
Coverer
Rear press wheel
(Monoflex)
Monopill S – Mulch Sowing Unit
6
1
2
3
4
5
6
3
1
2
4
5
Double cutting disc
Coulter extension
Spring loaded
intermediate press wheel
Disc coverer - spring
loaded
Rear press wheel
(Monoflex)
Spring load for sowing
row up to 50 kg
Monopill S – Mechanical Drive
• Working widths between 3.00m - 9.00m
• The basic element with chain driven sowing heart for normal & mulch seeding
• Depth adjustment in steps of 0,5cm
• Integrated ball bearing drivelines into the parallelogram linkage for a consistent seed disc
turning
• Visus – Opto-electronic control
• Control of each unit by an Opto transmitter
• Tramlining
• Monitor seed/ha, total worked area
• Electronic hectare meter
Monopill e-drive II
• Working widths between 3.00m - 12.00m
• The enhanced element based on the same row concept
• Each sowing heart is driven by an electric motor
• Infinite adjustment of sowing distances for optimised seed population (from 12.5 – 25
cm)
Monopill – Equipment
Standard sowing unit with
Finger press wheel
Tandem sowing unit
Mulch sowing unit with
Monoflex press wheel
Monopill – Press Wheels
Row setting = Coulter – intermediate press wheel – coverer – conical press wheel
1. V-shaped coulter opens the furrow
2. The intermediate press wheel firms seed into
the furrow
3. The coverers put some more earth on the
furrow
4. The conical press wheel consolidate the earth
at the side more than in the middle
=> The amount of covering soil (B) is similar to
that of the sowing depth (A)
 Ideal for wet and loamy soils
Monopill – Press Wheels
Row setting = Coulter – coverer – finger press wheel
1. V-shaped coulter opens the furrow
2. The coverers put some more earth on the
furrow
3. The finger press wheel consolidate the earth
in the middle more than at the sides
=> The covering soil (B) is lower than the sowing
depth (A).
 A "Micro climate" then protects the germinated plant
Monopill S/ e-drive II – Electronics
Introduction: tramlines in Sugar Beet
Reasons for setting up tramlines:
•
Opportunity to save sugar beet seeds (cost of 100.000 sugar beet seeds: 150 €)
•
Ease follow-up operations e.g. fertilising and spraying with less crop damage
•
Opportunity to drive over the sugar beet field without special cultivation tyres
=> reduce handling costs
•
Reduction of losses at the edge of rows => uniform root size
•
Possibility to reduce soil compaction and damage of the earth structure => use of
floatation tyres possible
•
Reduce the danger of erosion in the tractor wheel tracks
Visus – The Opto - Electronic Control
• Monitoring of seeds/ha
• Control of up to 12 sowing units
• Electric hectare meter
• Summary of worked total area
• Opto transmitter with plug connection
• Automatic tramlining system up to 4
clutches (set of 2 or set of 4 clutches)
• Service function
1.Seed coulter
2.Seed disc
3.Optosensor
Mechanical Shut-off via Clutches
Monopill S with Visus
• Opto-electronic control and tramlining
• Only for customers with a fixed tramline widths
• Maximum of 4 shut-off clutches
• Set of 2 or set of 4 shut-off clutches
• Spraying width:
– 10.8m; 16.2m; 27.0m; 21.6m; 32.4 m
(12r/45cm/1.80m)
– 12.0m; 18.0m; 24.0m; 32.0m; 36.0m
(12 r/50cm/2.00m)
Visus
Monopill with e-drive II
Monopill e-drive II with IsoMatch Tellus
• All standard tramlines are programmed in Monopill
e-drive II control box (also chaotic systems)
• Seed spacing adjustment during work
• The amount of seed at edge rows can be reduced or
increased stepwise
• Opto-electronic sensors counting the seeds and
advising of unit problems (e.g. empty hopper)
• Row by row shut-off  Ready for GEOcontroll® IsoMatch
Tellus
• On board diagnostic system to help locate failures
• Ready for GEOseed®
Monopill e-drive II – IsoMatch Tellus
The next generation universal ISOBUS
Terminal – IsoMatch Tellus
• Two ISOBUS interfaces in one terminal
• Multifunctional ergonomic design
• ISOBUS Shortcut Button
The IsoMatch Tellus is the first ISOBUS with the
capability to operate different machines on 2 screens
through 1 terminal, without the need to constantly
toggle between screens.
GEOcontroll® - the automatically row
switch-off, steered by GPS
•
•
•
•
•
•
Steered by GPS one row after another is
switched off at the heads land
Saving seeds
No place in field with doubles or triples
No missings  no free spots for weeds in
the field
Easy handling for driver
Full concentration of driver on field
conditions and turning process
GEOseed® - the intelligent way of precise
placing of seeds
Seeding in parallel and diamond pattern
•
•
•
•
The patented two-dimension placement
control allows seeding in parallel or diamond
patterns
By adding a precise GPS signal (RTK) in
combination the sowing heart extension
synchronisation beyond machine width is
ensured by GPS co-ordinates.
Positive effects of GEOseed® can be
reached with close row sowing (37,5 – 45
cm) and seed distances wider than 18-20
cm
Further information about the possibilities
and necessary needs for GEOseed you find
in GEOseed presenation!
GEOseed® - the intelligent way of precise
placing of seeds
sugarbeet with Monopill and GEOseed
Monopill – Additional Equipment
Option – Microgranular applicator
•
Hoppers, made out of special plastics
•
Capacity per hopper of 35 litres
•
Hoppers mounted according to the working width
•
With 2 or 3 outlets per unit
•
Metering wheels of different sizes and materials
 application requirements of most types of micro-granule
Monopill - Technical Data Frame
Monopill frame
6 rows rigid
12 rows rigid
18 rows rigid
24 rows rigid
12 rows PH
18 rows PH
mechanic drive with 7 gear lever gearbox
X
X
X
-
X
X
e-drive II
X
X
X
X
X
X
Tyres 5.00-15
X
X
X
-
X
X
Tyres 26x12 STG
-
-
-
X
-
-
Manually operated Track marker
X
-
-
-
-
-
Hyraulic operated track marker arms
O
X
X
X
X
X
Pre Emergence markers
O
O*
O*
on request
O
O
Mechanic Hectaremeter
O
O
O
-
O
O
Lighting Equipment
O
O
O
O
O
O
Drift prevention disc
O
O
O
O
O
O
Microgranualar applicator
O
O
O
-
O
-
45/50
45/50
45/50
45/50
45/50
45/50
400
910
1750
2800
1250
2180
Row width
Total weight (kg) for basic version
* Possibility of collisions between PEM and Lengthwise transport device
X Standard equipment
O Optional Equipment
- Not Available
Monopill - Technical Data Sowing Unit
Monopill sowing unit
Normal seeding
Tandem row
Mulch seeding
Parallelogramm hitch
X
X
X
Clod deflector
O
O
-
-
-
O
Rotating coverer
O
-
X
Rigid coverer
X
X
O
Monoflex press wheel
X
X
X
Finger press wheel
O
O
O
Single hopper content (l)
9
9
9
Weight of one sowing unit (kg)
50
59
64
Parallel clod deflector
X Standard equipment
O Optional Equipment
- Not Available
Monopill: Main advantages
• Proven, stable frame concept
• Clear design and good accessibility for easy operation
• Zero Deposit – for precise and very accurate seed placement
• Special chain control (no backlash) for a calm and constant run of the unit
• Electronic drive for enhanced performance (e-drive II)
• Additional tools for a perfect seed bed
• Exact tramlining control system to ease the follow up operations
• Precision Farming for cost efficiency and yield optimization
• Monopill with e-drive II is ready for GEOseed®
visit us at www.kvernelandgroup.com
The Future of Farming
See our
Machines
at work
on YouTube